CAT 930M 4WD Front End Rubber Tire Payloader
The Cat 930M Small Wheel Loader sets the standard for productivity, fuel efficiency and operator comfort. The improved optimized Z-bar loader linkage delivers the quick loading performance of a traditional Z-bar with the parallelism and load handling capability of a tool carrier. A high torque, low speed C7.1 ACERT engine works in concert with an intelligent hystat power train to deliver fuel efficiency as standard. Meets Tier 4 Final/Stage IV emission standards with an environmentally friendly, Clean Emission Module designed to manage itself so you can concentrate on your work. Experience the new industry benchmark.
Engine
| Rated Net Power |
157.0 hp 117.0 kW |
| Bore |
4.0 in 105.0 mm |
| Stroke |
5.0 in 135.0 mm |
| Displacement |
427.0 in3 7.01 L |
| Engine Model |
Cat® C7.1 ACERT™ Cat® C7.1 ACERT™ |
| Maximum Rated Gross Power: ISO 14396 |
164.0 hp 122.0 kW |
| Maximum Rated Gross Power: ISO 14396 (DIN) |
166.0 hp 122.0 kW |
| Maximum Rated Gross Power – Maximum Engine Speed (Performance Power Mode: Range 1-4) |
1800.0 rpm 1800.0 rpm |
| Maximum Rated Gross Power – ISO 14396 (Performance Power Mode: Range 1-4) |
164.0 hp 122.0 kW |
| Maximum Rated Gross Power – ISO 14396 (DIN) (Performance Power Mode: Range 1-4) |
166.0 hp 122.0 kW |
| Rated Net Power at 1,800 rpm – SAE J1349 at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
157.0 hp 117.0 kW |
| Rated Net Power at 1,800 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
160.0 hp 119.0 kW |
| Rated Net Power at 1,800 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Performance Power Mode: Range 1-4) |
162.0 hp 119.0 kW |
| Maximum Gross Torque – ISO 14396 (Performance Power Mode: Range 1-4) |
592.0 lbf-ft 804.0 N·m |
| Maximum Net Torque – SAE J1349 (Performance Power Mode: Range 1-4) |
566.0 lbf-ft 768.0 N·m |
| Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Performance Power Mode: Range 1-4) |
572.0 lbf-ft 776.0 N·m |
| Maximum Rated Gross Power – Maximum Engine Speed (Standard Power Mode: Range 1-3*) |
1600.0 rpm 1600.0 rpm |
| Maximum Rated Gross Power – ISO 14396 (Standard Power Mode: Range 1-3*) |
160.0 hp 119.0 kW |
| Maximum Rated Gross Power – ISO 14396 (DIN) (Standard Power Mode: Range 1-3*) |
162.0 hp 119.0 kW |
| Rated Net Power at 1,600 rpm – SAE J1349 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
154.0 hp 115.0 kW |
| Rated Net Power at 1,600 rpm – ISO 9249 (1977)/EEC 80/1269 at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
156.0 hp 116.0 kW |
| Rated Net Power at 1,600 rpm – ISO 9249 (DIN) at Minimum Fan Speed (Standard Power Mode: Range 1-3*) |
158.0 hp 116.0 kW |
| Maximum Gross Torque – ISO 14396 (Standard Power Mode: Range 1-3*) |
592.0 lbf-ft 804.0 N·m |
| Maximum Net Torque – SAE J1349 (Standard Power Mode: Range 1-3*) |
566.0 lbf-ft 768.0 N·m |
| Maximum Net Torque – ISO 9249 (1977)/EEC 80/1269 (Standard Power Mode: Range 1-3*) |
572.0 lbf-ft 776.0 N·m |
| Emissions |
Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards. |
| Note |
* Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. * Range 4 power and torque is equal to Performance Mode with Caterpillar Power by Range technology. |
Buckets
| Bucket Capacities |
2.1-5.0 m3 (2.7-6.5 yd3) 2.1-5.0 m3 (2.7-6.5 yd3) |
More Less |
Weights
| Operating Weight |
30879.0 lb 14007.0 kg |
More Less |
Steering
| Steering Cylinder: Double Acting – Bore Diameter |
2.8 in 70.0 mm |
| Steering Cylinder: Double Acting – Rod Diameter |
1.6 in 40.0 mm |
| Steering Cylinder: Double Acting – Stroke |
17.2 in 438.0 mm |
| Maximum Flow – Steering Pump |
34.0 gal/min 130.0 L/min |
| Maximum Working Pressure – Steering Pump |
3500.0 psi 24130.0 kPa |
| Maximum Steering Torque – 0° (Straight Machine) |
37155.0 lbf-ft 50375.0 N·m |
| Maximum Steering Torque – 40° (Full Turn) |
27747.0 lbf-ft 37620.0 N·m |
| Steering Cycle Times (Full Left to Full Right) – Minimum RPM: Pump Flow Limited |
2.8 seconds 2.8 seconds |
| Steering Cycle Times (Full Left to Full Right) – Maximum RPM: 90 rpm Steering Wheel Speed |
2.4 seconds 2.4 seconds |
Loader Hydraulic System
| Maximum Flow – Implement Pump |
50.0 gal/min 190.0 L/min |
| Maximum Flow – Implement Pump: 3rd Function Maximum Flow* |
50.0 gal/min 190.0 L/min |
| Maximum Flow – Implement Pump: 4th Function Maximum Flow* |
42.0 gal/min 160.0 L/min |
| Maximum Working Pressure – Implement Pump |
3626.0 psi 25000.0 kPa |
| Relief Pressure – Tilt Cylinder |
4061.0 psi 28000.0 kPa |
| Relief Pressure – Tilt Cylinder: 3rd and 4th Function Maximum Working Pressure |
3626.0 psi 25000.0 kPa |
| Relief Pressure – Tilt Cylinder: 3rd and 4th Function Relief Pressure |
4061.0 psi 28000.0 kPa |
| Lift Cylinder: Double Acting – Bore Diameter |
4.7 in 120.0 mm |
| Lift Cylinder: Double Acting – Rod Diameter |
2.6 in 65.0 mm |
| Lift Cylinder: Double Acting – Stroke |
28.7 in 728.0 mm |
| Tilt Cylinder: Double Acting – Bore Diameter |
5.9 in 150.0 mm |
| Tilt Cylinder: Double Acting – Rod Diameter |
3.5 in 90.0 mm |
| Tilt Cylinder: Double Acting – Stroke |
21.9 in 555.0 mm |
| Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Raise (Ground Level to Maximum Lift) |
5.1/5.7 seconds 5.1/5.7 seconds |
| Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Dump (at Maximum Lift Height) |
1.5/1.7 seconds 1.5/1.7 seconds |
| Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Float Down (Maximum Lift to Ground Level) |
2.7/2.7 seconds 2.7/2.7 seconds |
| Cycle Times: Performance (HP+) at 1,800 rpm/Standard Power Mode at 1,600 rpm – Total Cycle Time |
9.3/10.1 seconds 9.3/10.1 seconds |
| Note |
* 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. * 3rd and 4th function flow is fully adjustable from 20% to 100% of maximum flow through the secondary display when equipped. |
Service Refill Capacities
| Fuel Tank |
51.5 gal 195.0 L |
| Cooling System |
7.9 gal 30.0 L |
| Engine Crankcase |
5.3 gal 20.0 L |
| Transmission (Gear Box) |
2.2 gal 8.5 L |
| Front Axles |
6.9 gal 26.0 L |
| Rear Axles |
6.6 gal 25.0 L |
| Hydraulic System (Including Tank) |
43.6 gal 165.0 L |
| Hydraulic Tank |
23.8 gal 90.0 L |
| Diesel Exhaust Fluid (DEF) Tank |
5.0 gal 19.0 L |
Transmission
| Forward and Reverse: Range 1* |
1-13 km/h (0.6-8 mph) 1-13 km/h (0.6-8 mph) |
| Forward and Reverse: Range 2 |
8.0 mph 13.0 km/h |
| Forward and Reverse: Range 3 |
17.0 mph 27.0 km/h |
| Forward and Reverse: Range 4 |
25.0 mph 40.0 km/h |
| Note |
* Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1. * Creeper control allows maximum speed range adjustability from 1 km/h (0.6 mph) to 13 km/h (8 mph) in Range 1. |
| Note (cont'd) |
Factory default is 7 km/h (4.4 mph). Factory default is 7 km/h (4.4 mph). |
Cab
| ROPS |
SAE J1040 MAY94, ISO 3471-1994. SAE J1040 MAY94, ISO 3471-1994. |
| FOPS |
SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. SAE J/ISO 3449 APR98, Level II, ISO 3449 1992 Level II. |
Operating Specifications
| Full Turn Tip Load |
18670.0 lb 8469.0 kg |
More Less |
Power Train
| Front Axle |
Fixed Fixed |
| Front Axle: Traction Aid (standard) |
Locking differential Locking differential |
| Rear Axle |
Oscillating Oscillating |
| Rear Axle: Oscillation Angle by Tire Size – 20.5 R25, 550/65, 600/65, 650/65 |
± 10.5 degrees ± 10.5 degrees |
| Rear Axle: Oscillation Angle by Tire Size – Flexports, 750/65, 620/65, Skidder |
± 7 degrees ± 7 degrees |
| Rear Axle: Traction Aid (optional) |
Limited slip differential Limited slip differential |
| Brakes: Service |
Inboard wet disc |
