BUSINESS HOURS

Mon-Fri 7:00AM - 7:00PM
SAT/SUN by appointment only!

CREATE ACCOUNT

*

*

*

*

*

*

FORGOT YOUR PASSWORD?

*

Skidsteer Wheel Loaders 4WD

  • CAT 262C Skidsteer Loader 4WD

    Overview

    An industry-first sealed and pressurized cab, increased rated operating capacity, higher horsepower and superior performance help you get more done and increase your bottom line.

    Engine

    Engine Model Cat® C3.4 DIT Cat® C3.4 DIT
    Net Flywheel Power 73.0 hp 54.0 kW
    Gross Power 73.0 hp 55.0 kW
    Gross Power SAE J1995 74.0 hp 55.0 kW
    Net Power SAE 1349 73.0 hp 54.0 kW
    Displacement 201.0 in3 3.3 L
    Stroke 4.7 in 120.0 mm
    Bore 3.7 in 94.0 mm

    Weights

    Operating Weight 7968.0 lb 3614.0 kg Less

    Operating Specifications

    Rated Operating Capacity 2700.0 lb 1225.0 kg
    Rated Operating Capacity w/Optional Counterweight 2945.0 lb 1336.0 kg
    Tipping Load 5400.0 lb 2449.0 kg
    Breakout Force, Tilt Cylinder 7315.0 lb 3318.0 kg

    Dimensions

    Wheelbase 48.8 in 1240.0 mm
    Length w/Bucket on Ground 145.4 in 3692.0 mm
    Length w/o Bucket 117.3 in 2979.0 mm
    Height to Top of Cab 82.8 in 2104.0 mm
    Vehicle Width over Tires 66.0 in 1676.0 mm
    Max Overall Height 160.4 in 4075.0 mm
    Bucket Pin Height at Max Lift 127.3 in 3233.0 mm
    Bucket Pin Height at Carry Pos. 7.8 in 200.0 mm
    Reach at Max Lift and Dump 30.7 in 781.0 mm
    Clearance at Max Lift and Dump 96.4 in 2450.0 mm
    Ground Clearance 8.8 in 225.0 mm
    Departure Angle 26° 26°
    Bumper Overhang - Rear Axle 42.8 in 1089.0 mm
    Maximum Dump Angle 50° 50°
    Turn Radius from Ctr - Rear 68.1 in 1730.0 mm
    Turn Radius from Ctr - Coupler 54.6 in 1386.0 mm
    Turn Radius from Ctr - Bucket 85.3 in 2167.0 mm
    Max. Reach w/Arms-Parallel 50.5 in 1283.0 mm
    Rack Back Angle at Max Height 85° 85°
    Bucket Pin Reach at Max Lift 14.7 in 373.0 mm

    Hydraulic System

    Max. Loader Hydraulic Pressure 4061.0 psi 28000.0 kPa
    Max. Loader Hydraulic Flow 33.0 gal/min 125.0 L/min
    Hydraulic Power 42.8 hp 31.9 kW
    Hydraulic Flow Standard Standard
    Loader Hydraulic Pressure 3335.0 psi 23000.0 kPa
    Loader Hydraulic Flow 22.0 gal/min 84.0 L/min
    Hydraulic Flow High Flow XPS High Flow XPS

    Cab

    ROPS SAE J1040 MAY94, ISO 3471:1994 SAE J1040 MAY94, ISO 3471:1994
    FOPS SAE J1043 SEPT87, ISO 3449:1992 Level I SAE J1043 SEPT87, ISO 3449:1992 Level I
    FOPS Level II SAE J231 JAN81, ISO 3449:1992 Level II SAE J231 JAN81, ISO 3449:1992 Level II

    Power Train

    Travel Speed Forward 7.7 mph 12.5 km/h
    Travel Speed Reverse 7.7 mph 12.5 km/h
    Travel Speed Forward - 2-Speed Option 12.0 mph 19.3 km/h
    Travel Speed Reverse - 2-Speed Option 12.0 mph 19.3 km/h

    Service Refill Capacities

    Chain box, each side 2.6 gal 10.0 L
    Cooling System 3.7 gal 14.0 L
    Engine Crankcase 2.6 gal 10.0 L
    Fuel Tank 26.0 gal 98.0 L
    Hydraulic System 15.0 gal 57.0 L
    Hydraulic Tank

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE


  • CAT 262D Skidsteer Loader 4WD

    Overview

    The Cat 262D Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading. Its stability and lifting performance provides excellent material handling.

    Engine

    Engine Model Cat C3.3B DIT (Turbo) Cat C3.3B DIT (Turbo)
    Net Flywheel Power 72.9 hp 54.4 kW
    Gross Power 74.3 hp 55.4 kW
    Gross Power SAE J1995 74.3 hp 55.4 kW
    Net Power EEC ISO 9249 73.7 hp 54.9 kW
    Net Power SAE 1349 72.9 hp 54.4 kW
    Displacement 203.0 in3 3.3 L
    Stroke 4.7 in 120.0 mm
    Bore 3.7 in 94.0 mm

    Weights

    Operating Weight 8011.0 lb 3634.0 kg Less

    Operating Specifications

    Rated Operating Capacity 2700.0 lb 1225.0 kg
    Rated Operating Capacity w/Optional Counterweight 2950.0 lb 1338.0 kg
    Tipping Load 5400.0 lb 2449.0 kg
    Breakout Force, Tilt Cylinder 7355.0 lb 3336.0 kg

    Dimensions

    Wheelbase 49.2 in 1249.0 mm
    Length w/Bucket on Ground 146.2 in 3714.0 mm
    Length w/o Bucket 117.9 in 2995.0 mm
    Height to Top of Cab 83.1 in 2110.0 mm
    Vehicle Width over Tires 66.0 in 1676.0 mm
    Max Overall Height 157.8 in 4008.0 mm
    Bucket Pin Height at Max Lift 124.9 in 3172.0 mm
    Bucket Pin Height at Carry Pos. 7.9 in 200.0 mm
    Reach at Max Lift and Dump 30.9 in 786.0 mm
    Clearance at Max Lift and Dump 93.7 in 2380.0 mm
    Ground Clearance 8.9 in 226.0 mm
    Departure Angle 26° 26°
    Bumper Overhang - Rear Axle 42.6 in 1083.0 mm
    Maximum Dump Angle 51° 51°
    Turn Radius from Ctr - Rear 71.1 in 1805.0 mm
    Turn Radius from Ctr - Coupler 55.2 in 1401.0 mm
    Turn Radius from Ctr - Bucket 85.9 in 2181.0 mm
    Max. Reach w/Arms-Parallel 50.9 in 1293.0 mm
    Rack Back Angle at Max Height 84° 84°
    Bucket Pin Reach at Max Lift 15.5 in 393.0 mm

    Hydraulic System

    Hydraulic Flow Standard Standard
    Hydraulic Flow High Flow XPS High Flow XPS
    Loader Hydraulic Pressure 3335.0 psi 23000.0 kPa
    Loader Hydraulic Pressure 4061.0 psi 28000.0 kPa
    Loader Hydraulic Flow 23.0 gal/min 86.0 L/min
    Loader Hydraulic Flow 32.0 gal/min 121.0 L/min
    Hydraulic Power (calculated) 44.0 hp 33.0 kW
    Hydraulic Power (calculated) 76.0 hp 57.0 kW

    Cab

    ROPS ISO 3471:2008 ISO 3471:2008
    FOPS ISO 3449:2005 Level I ISO 3449:2005 Level I
    FOPS Level II ISO 3449:2005 Level II ISO 3449:2005 Level II

    Power Train

    Travel Speed Forward 7.7 mph 12.5 km/h
    Travel Speed Reverse 7.7 mph 12.5 km/h
    Travel Speed Forward - 2-Speed Option 11.0 mph 17.7 km/h
    Travel Speed Reverse - 2-Speed Option 11.0 mph 17.7 km/h

    Service Refill Capacities

    Chain box, each side 3.3 gal 12.7 L
    Cooling System 3.7 gal 14.0 L
    Engine Crankcase 3.0 gal 11.0 L
    Fuel Tank 24.8 gal 94.0 L
    Hydraulic System 13.7 gal 52.0 L
    Hydraulic Tank 10.3 gal

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE


  • CAT 299D Compact Track Loader

    Overview

    The Cat 299D XHP Compact Track Loader, with its powerful engine, high output hydraulic system, high lift forces, vertical lift design and torsion axle suspension, provides the maximum performance for work tool productivity, digging, truck loading and material handling in a wide range of underfoot conditions and applications.

    Engine

    Engine Model Cat C3.8 DIT (Turbo) Cat C3.8 DIT (Turbo)
    Net Power 106.0 hp 79.0 kW
    Gross Power 110.0 hp 82.0 kW
    Gross Power SAE J1995 110.0 hp 82.0 kW
    Net Power SAE 1349 106.0 hp 79.0 kW
    Displacement 232.0 in3 3.8 L
    Bore 3.9 in 100.0 mm
    Stroke 4.7 in 120.0 mm

    Weights

    Operating Weight 11612.0 lb 5267.0 kg Less

    Operating Specifications

    Rated Operating Capacities: 50% Tipping Load 4650.0 lb 2109.0 kg
    Rated Operating Capacities: 35% Tipping Load 3255.0 lb 1476.0 kg
    Ground Contact Area 2184.0 in2 1.41 m2
    Ground Pressure 5.3 psi 36.7 kPa
    Tipping Load 9300.0 lb 4218.0 kg
    Breakout Force, Tilt Cylinder 7552.0 lb 3426.0 kg
    Breakout Force, Lift Cylinder 6111.0 lb 2772.0 kg

    Dimensions

    Length of Track on Ground 69.6 in 1767.0 mm
    Overall Length of Track 89.4 in 2270.0 mm
    Length w/Bucket on Ground 151.8 in 3855.0 mm
    Length w/o Bucket 123.5 in 3138.0 mm
    Height to Top of Cab 83.7 in 2127.0 mm
    Vehicle Width 78.0 in 1981.0 mm
    Max. Overall Height 158.4 in 4024.0 mm
    Bucket Pin Height at Max. Lift 125.6 in 3191.0 mm
    Bucket Pin Height at Carry Pos. 7.9 in 200.0 mm
    Reach at Max. Lift/Dump 30.6 in 778.0 mm
    Clearance at Max. Lift/Dump 94.3 in 2395.0 mm
    Ground Clearance 8.7 in 222.0 mm
    Departure Angle 30° 30°
    Maximum Dump Angle 52° 52°
    Turn Radius from Ctr - Rear 73.4 in 1863.0 mm
    Turn Radius from Ctr - Coupler 58.0 in 1474.0 mm
    Turn Radius from Ctr - Bucket 91.2 in 2317.0 mm
    Max. Reach w/Arms Parallel 50.2 in 1276.0 mm
    Rack Back Angle at Max Height 83° 83°
    Bucket Pin Reach at Max Lift 15.6 in 396.0 mm

    Hydraulic System

    Hydraulic Flow Standard Standard
    Hydraulic Flow High Flow XHP High Flow XHP
    Loader Hydraulic Pressure 3335.0 psi 23000.0 kPa
    Loader Hydraulic Flow 23.0 gal/min 86.0 L/min
    Hydraulic Power 44.0 hp 33.0 kW
    Max. Loader Hydraulic Pressure 4061.0 psi 28000.0 kPa
    Max. Loader Hydraulic Flow 40.0 gal/min 150.0 L/min
    Hydraulic Power (calculated) 94.0 hp 70.0 kW

    Cab

    ROPS ISO 3471:2008 ISO 3471:2008
    FOPS ISO 3449:2005 Level I ISO 3449:2005 Level I
    FOPS Level II ISO 3449:2005 Level II ISO 3449:2005 Level II

    Power Train

    Travel Speed Forward 5.2 mph 8.4 km/h
    Travel Speed Reverse 5.2 mph 8.4 km/h
    Travel Speed Reverse - 2-Speed 8.4 mph 13.5 km/h
    Travel Speed Forward - 2-Speed 8.4 mph 13.5 km/h

    Service Refill Capacities

    Cooling System 4.1 gal 16.0 L
    Engine Crankcase 3.5 gal 13.0 L
    Fuel Tank 32.2 gal 122.0 L
    Hydraulic System 14.5 gal 55.0 L
    Hydraulic Tank 10.3 gal

    DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE


TOP

THEME OPTIONS

Header type:
Theme Colors:
Color suggestions *
THEME
* May not have full accuracy!