Large Hydraulic Dozers
-
CAT D4K2 Track Dozer 92hp / 18,500lb
Engine
Engine Model Cat C4.4 ACERT Cat C4.4 ACERT Power - Net 92.0 hp 68.8 kW Displacement 269.0 in3 4.4 L Bore 4.13 in 105.0 mm Stroke 5.0 in 127.0 mm Rated Net Power @ 2,200 rpm – SAE J1349 92.0 hp 68.8 kW Rated Net Power @ 2,200 rpm – ISO 9249/EEC 80/1269 92.0 hp 68.8 kW Note Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. Engine meets Tier 4 Final/Stage IV/Japan 2014 (Tier 4 Final) emission standards. Transmission
Drive Pumps 1 1 Track Motors 2 2 Relief Valve Settings 7033.0 psi 48500.0 kPa Maximum Travel Speed – Forward 5.6 mph 9.0 km/h Maximum Travel Speed – Reverse 6.2 mph 10.0 km/h Weights
Operating Weight - XL 18007.0 lb 8168.0 kg Operating Weight - LGP 18686.0 lb 8476.0 kg Note Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank. Service Refill Capacities
Fuel Tank 51.5 gal 195.0 L Crankcase and Filter 2.91 gal 11.0 L Final Drives, XL (each side) 2.6 gal 10.0 L Final Drives, LGP (each side) 2.6 gal 10.0 L Cooling System 5.92 gal 22.4 L Transmission/Hydraulic Tank 15.7 gal 59.5 L Diesel Exhaust Fluid (DEF) Tank 4.9 gal 19.0 L Hydraulic Controls
Pump Output 17.7 gal/min 68.0 L/min Relief Valve Settings 2988.0 psi 20600.0 kPa Undercarriage
Shoe Width – XL 18.0 in 460.0 mm Shoe Width – LGP 25.0 in 635.0 mm Length of Track on Ground – XL 89.0 in 2248.0 mm Length of Track on Ground – LGP 89.0 in 2248.0 mm Track Gauge – XL 61.0 in 1550.0 mm Track Gauge – LGP 68.0 in 1725.0 mm Ground Contact Area – XL 3206.0 in2 20682.0 cm2 Ground Contact Area – LGP 4425.0 in2 28550.0 cm2 Ground Pressure – XL 5.6 psi 38.6 kPa Ground Pressure – LGP 4.2 psi 29.2 kPa Number of Rollers (each side) 7 7 Number of Shoes (each side) – Sealed and Lubricated Track (SALT) Undercarriage 43 43 Number of Shoes (each side) – SystemOne Undercarriage 38 38 Ripper
Type Parallelogram Parallelogram Number of Shanks 3 3 Height 6.5 in 165.0 mm Weight 1222.0 lb 554.0 kg Maximum Digging Depth 13.3 in 337.5 mm Maximum Reach at Ground Line 23.5 in 596.0 mm Maximum Ground Clearance Under Tip 17.6 in 448.0 mm Overall Width 67.3 in 1710.0 mm Winch
Weight 1345.0 lb 610.0 kg Winch Drive Hydrostatic Hydrostatic Control Hydraulic Hydraulic Speed Variable Variable Winch Length 27.76 in 705.0 mm Overall Width 29.2 in 741.0 mm Drum Diameter 10.0 in 254.0 mm Drum Width 10.8 in 274.0 mm Throat Clearance 6.75 in 171.5 mm Rope Diameter – recommended 0.63 in 16.0 mm Rope Diameter – optional 0.75 in 19.0 mm Drum Capacity – recommended cable 371.0 ft 113.0 m Drum Capacity – optional cable 256.0 ft 78.0 m Maximum Line Pull – bare drum 40000.0 lb 18144.0 kg Maximum Line Pull – full drum 25000.0 lb 11340.0 kg Maximum Line Speed – bare drum 131.0 ft/min 40.0 m/min Maximum Line Speed – full drum 207.0 ft/min 63.0 m/min Cab
Sound Levels: ISO 6396:2008 77.0 dB(A) 77.0 dB(A) Sound Levels: SAE J1166 FEB2008 78.0 dB(A) 78.0 dB(A) ROPS SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-2008 SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-2008 FOPS SAE J231-JAN81, ISO 3449-2005 Level III SAE J231-JAN81, ISO 3449-2005 Level III Dimensions
Track Gauge – XL 61.0 in 1550.0 mm Track Gauge – LGP 67.9 in 1725.0 mm Width of Tractor (standard shoes, no blade) – XL 79.1 in 2010.0 mm Width of Tractor (standard shoes, no blade) – LGP 92.9 in 2360.0 mm Overall Length (with blade) – XL 168.3 in 4274.0 mm Overall Length (with blade) – LGP 168.3 in 4274.0 mm Length of Basic Tractor (without blade) – XL 128.9 in 3275.0 mm Length of Basic Tractor (without blade) – LGP 128.9 in 3275.0 mm Tractor Height – XL 108.8 in 2763.0 mm Tractor Height – LGP 108.8 in 2763.0 mm Ground Clearance – XL 13.0 in 332.0 mm Ground Clearance – LGP 13.0 in 332.0 mm BLADE: Blade Width – XL 109.5 in 2782.0 mm BLADE: Blade Width – Intermediate 115.0 in 2921.0 mm BLADE: Blade Width – LGP 124.0 in 3149.0 mm BLADE: Blade Height – XL 39.8 in 1010.0 mm BLADE: Blade Height – Intermediate 33.9 in 860.0 mm BLADE: Blade Height – LGP 35.8 in 910.0 mm BLADE: Blade Lift Height – XL 29.3 in 743.0 mm BLADE: Blade Lift Height – Intermediate 29.3 in 743.0 mm BLADE: Blade Lift Height – LGP 27.9 in 708.0 mm BLADE: Digging Depth – XL 22.5 in 573.0 mm BLADE: Digging Depth – Intermediate 23.2 in 590.0 mm BLADE: Digging Depth – LGP 23.2 in 590.0 mm BLADE: Blade Cutting Edge Angle, Adjustable – XL 52° to 58° 52° to 58° BLADE: Blade Cutting Edge Angle, Adjustable – Intermediate 52° to 58° 52° to 58° BLADE: Blade Cutting Edge Angle, Adjustable – LGP 52° to 58° 52° to 58° BLADE: Maximum Tilt – XL 15.2 in 387.0 mm BLADE: Maximum Tilt – Intermediate 17.6 in 448.0 mm BLADE: Maximum Tilt – LGP 17.2 in 438.0 mm BLADE: Maximum Angle (either side) – XL 25° 25° BLADE: Maximum Angle (either side) – Intermediate 25° 25° BLADE: Maximum Angle (either side) – LGP 25° 25° BLADE: Blade Width at Maximum Angle – XL 100.1 in 2542.0 mm BLADE: Blade Width at Maximum Angle – Intermediate 105.1 in 2669.0 mm BLADE: Blade Width at Maximum Angle – LGP 113.1 in 2874.0 mm BLADE: Blade Capacity (SAE) – XL 2.59 yd3 1.98 m3 BLADE: Blade Capacity (SAE) – Intermediate 1.96 yd3 1.5 m3 BLADE: Blade Capacity (SAE) – LGP 2.42 yd3 1.85 m3 
DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE
-
CAT D5K2 Track Dozer 104hp / 20,500lb
Overview
Experience the most intuitive finish grading tractor in the industry. The Cat® D5K2 Track-Type Tractor with Stable Blade delivers a smooth finish grade with less operator effort. Stable Blade senses ground conditions and works with the operator to produce the desired grade. The addition of the integrated AccuGrade™ grade control system helps you get to target grade even faster, with fewer passes and less manpower. From the first cut to finish grade, the D5K2 sets the standard.
Engine
Engine Model Cat C4.4 ACERT™ Cat C4.4 ACERT™ Power - Net 104.0 hp 77.6 kW Displacement 269.0 in3 4400.0 cm3 ISO 9249 104.0 hp 77.6 kW EEC 80/1269 104.0 hp 77.6 kW SAE J1349 104.0 hp 77.6 kW Bore 4.13 in 105.0 mm Stroke 5.0 in 127.0 mm Transmission
Drive Pumps 2 2 Track motors 2 2 Relief valve settings 6918.0 psi 47700.0 kPa Maximum travel speed - forward 5.6 mph 9.0 km/h Maximum travel speed - reverse 6.2 mph 10.0 km/h Weights
Operating Weight - XL 20534.0 lb 9314.0 kg Operating Weight - LGP 21266.0 lb 9646.0 kg Service Refill Capacities
Fuel tank 51.5 gal 195.0 L Crankcase and filter 2.91 gal 11.0 L Final drives, XL (each side) 2.6 gal 10.0 L Final drives, LGP (each side) 2.6 gal 10.0 L Cooling system 5.92 gal 22.4 L Transmission/hydraulic tank 15.7 gal 59.5 L Hydraulic Controls
Pump Output 19.4 gal/min 73.5 L/min Relief valve setting 2988.0 psi 20600.0 kPa Undercarriage
Shoe width - XL 20.0 in 510.0 mm Shoe width - LGP 26.0 in 660.0 mm Length of track on ground - XL 91.0 in 2310.0 mm Length of track on ground - LGP 91.0 in 2310.0 mm Track gauge - XL 63.0 in 1600.0 mm Track gauge - LGP 69.0 in 1750.0 mm Ground contact area - XL 3652.0 in2 23562.0 cm2 Ground contact area - LGP 4726.0 in2 30492.0 cm2 Ground pressure - XL 5.6 psi 38.6 kPa Ground pressure - LGP 4.5 psi 31.1 kPa Ground contact area - LGP with 770 mm (30 in) shoes 5514.0 in2 35574.0 cm2 Ground pressure - LGP with 770 mm (30 in) shoes 3.93 psi 27.1 kPa Shoe width - LGP Option 2 30.0 in 762.0 mm Track gauge - LGP with 770 mm (30 in) shoes 73.2 in 1860.0 mm Ripper
Type Parallelogram Parallelogram Number of Shanks 3 3 Maximum digging depth 13.3 in 337.5 mm Maximum reach at ground line 21.9 in 555.0 mm Maximum ground clearance under tip 17.6 in 448.0 mm Overall width 67.3 in 1710.0 mm Height 6.5 in 165.0 mm Weight 1222.0 lb 554.0 kg Winch
Weight 1345.0 lb 610.0 kg Winch Drive Hydrostatic Hydrostatic Control Hydraulic Hydraulic Speed Variable Variable Winch length 27.76 in 705.0 mm Overall width 29.2 in 741.0 mm Drum diameter 10.0 in 254.0 mm Drum width 10.8 in 274.0 mm Throat clearance 6.75 in 171.5 mm Rope diameter - recommended 0.63 in 16.0 mm Rope diameter - optional 0.75 in 19.0 mm Drum capacity - recommended cable 371.0 ft 113.0 m Drum capacity - optional cable 256.0 ft 78.0 m Maximum line pull - bare drum 40000.0 lb 18144.0 kg Maximum line pull - full drum 25000.0 lb 11340.0 kg Maximum line speed - bare drum 131.0 ft/min 40.0 m/min Maximum line speed - full drum 207.0 ft/min 63.0 m/min Standards
ROPS SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95 FOPS SAE J231-JAN81, ISO 3449-92 SAE J231-JAN81, ISO 3449-92 DOWNLOAD FULL SPECIFICATIONS OR READ VIRTUAL BOOK HERE